Effects model guide 日本語

GLOSSARY

Guitar gear glossary

Short explanations of 76 words that appear in the lists and guides.

OD, explained

Overdrive. A lighter drive, like an amp turned up and breaking up naturally.

Fuzz, explained

A gritty, thick drive made by clipping the signal hard. In use since the 1960s.

High gain, explained

A sound, or a unit, with a great deal of drive. Common in metal and hard rock.

Gain, explained

How much the input is amplified. The higher it goes, the more drive.

Crunch, explained

Between clean and heavy drive: enough to break up lightly when played hard.

Booster, explained

An effect that lifts the level and the push. Placing it before a drive pedal or an amp to drive them further is standard practice.

Boost, explained

Lifting the level or a particular band. Used before a drive, it increases the drive as well.

Tweed, explained

The cloth covering of 1950s Fender amps, and by extension the thick, warm sound of that era.

Plexi, explained

The name given to the Marshall amps of the late 1960s, after their acrylic (Plexiglas) control panels.

Dumble, explained

American amps built by hand in tiny numbers by Howard Dumble. Known for smooth, singing leads, and very expensive.

Boutique, explained

High-end gear built by hand in small numbers by makers outside the large companies.

Preamp, explained

The front part of an amp, which shapes the tone and the drive. It is also sold as a unit of its own.

Power amp, explained

The rear section, amplifying what the preamp has shaped to a level that will drive a speaker. It bears on the drive and the feel as the volume rises.

Power valve, explained

The valve used in the power amp. The type — EL34, 6L6 and so on — changes the character of the sound.

Valve, explained

The traditional amplifying device. Its smooth way of distorting has long been the reference for guitar amp tone.

Solid state, explained

Amplification by semiconductors such as transistors, with no valves.

Germanium, explained

The transistor material used in early fuzzes and boosters. It tends towards a soft, round drive.

EL34, explained

A type of power valve, spoken of together with the forward midrange of Marshall and other British amps.

EL84, explained

A type of small power valve, used in the Vox AC30 and others, known for a sparkling drive.

Sag, explained

The momentary dip as the power supply fails to keep up with a hard-played note.

Bias, explained

The operating point of the current through a valve. Changing it changes the drive and the warmth.

Tone stack, explained

The circuit holding an amp's Bass, Middle and Treble. How the controls act varies greatly with the design.

Presence, explained

The control setting the tension of the top end at the power amp. It acts above Treble, on the band that governs cut.

Master, explained

The master volume, setting the overall level. It lowers the volume while leaving the amount of drive alone.

Headroom, explained

The room before the sound begins to distort. The more there is, the cleaner it stays as the volume rises.

Channel, explained

A path within an amp with a voice of its own — clean or drive, switched between.

Bright, explained

An input or switch that emphasises the top end. The bright side gives a sparkling top.

Jump, explained

Joining a vintage amp's two inputs (channels) with a short cable so both sound at once.

Scooped tone, explained

Voicing with the lows and highs raised and the midrange taken away.

Scoop, explained

Taking away a large amount of midrange. The same direction as a scooped tone.

Doom, explained

A heavy genre marked by slow, heavy tempos and thick, distorted low end.

Compression, explained

Compressing the sound to narrow the differences in level. On valve amps it often refers to the natural push-back felt when playing hard.

Comp, explained

A compressor. It holds down loud notes to narrow the gap with quiet ones, evening out the grain and extending the sound.

Limiter, explained

A kind of compressor, holding the level hard so it does not pass a set point.

Gate, explained

A device that cuts sound below a set level. Used to silence noise between notes, and in gated reverb to cut the tail short.

Equaliser, explained

A means of shaping tone by raising and lowering the level band by band.

EQ, explained

An equaliser. A means of shaping tone by raising and lowering the level band by band.

Filters, explained

A circuit that passes or removes particular bands. Moved, it changes the tone like a wah.

Resonance, explained

How far the band the filter acts on is emphasised. The higher it goes, the more peaked and particular the tone.

Q, explained

The width of the band an EQ or filter acts on. The larger the value, the narrower and more precise.

Envelope, explained

The shape of the level as it follows how hard the strings are played. An envelope filter moves the tone like a wah, according to the playing.

Wah, explained

An effect that moves the emphasised band with a pedal, making the sound speak, "wah-wah".

Attack, explained

The rise of the note, at the moment it is played.

Harmonics, explained

The higher-frequency content within a note, which decides its colour and richness.

Feedback, explained

Returning the output to the input. On a delay it sets the number of repeats; on a guitar it is the sound sustaining without end.

Tremolo, explained

An effect raising and lowering the level cyclically for a pulse.

Vibrato, explained

An effect raising and lowering the pitch cyclically for a sweep. Note that the "Vibrato" channel on Fender amps is in fact a tremolo, modulating the level.

Chorus, explained

An effect layering slightly shifted copies for width and movement.

Flanger, explained

An effect layering a very slightly delayed copy for a jet-aircraft sweep.

Phaser, explained

An effect layering a phase-shifted copy for a swirling sweep.

Uni-Vibe, explained

Modulation based on the 1960s Uni-Vibe, giving a swelling sweep.

Rotary, explained

A device that makes a swelling sweep by turning a speaker. Familiar from the organ.

Leslie, explained

The best-known make of rotary speaker, known for the swirling organ sound.

Octaver, explained

An effect adding a note an octave above or below the one played.

Pitch shift, explained

An effect that changes the pitch played, or adds a note at another pitch.

Synth, explained

An electronic, synthesiser-like sound, remade from the guitar signal with waveforms and filters.

BBD, explained

The part used in analogue delays, passing the signal along in steps to delay it. It gives a warm, slightly veiled sound.

Analogue delay, explained

A delay that holds the signal back with parts such as BBDs. It grows more veiled and softer with every repeat.

Space Echo, explained

Units such as the Roland RE-201, combining a tape echo with a spring reverb.

Tape, explained

Tape echo. The old delay that holds the sound back by recording to magnetic tape and playing it straight back, marked by its waver and warm wear.

Tap, explained

Each single repeat of a delay. Tap tempo is the function for matching the speed to the song by stepping on the beat.

BPM, explained

Beats per minute. It states the tempo of a song.

Reverse, explained

An effect swelling from behind, as though the sound were played backwards.

Spring, explained

A reverb made by passing the signal through metal springs. Long built into guitar amps.

Plate, explained

A reverb made by vibrating a metal sheet. A bright, smooth sound, long used in studios.

Room, explained

A reverb recreating a small space, about the size of a room.

Hall, explained

A reverb recreating a large space, like a concert hall.

Cabinets, explained

The box holding the speakers. The number of speakers and the build of the box change the sound greatly.

IR, explained

Impulse response. Data of a real cabinet recorded through a microphone; load it and the sound of that box is recreated.

Ribbon, explained

A ribbon microphone. It picks up with a thin metal foil, giving a soft top end and a warm sound.

Condenser, explained

A condenser microphone. Sensitive, catching detail well into the top end.

Greenback, explained

The name given to the Celestion speakers with green backs. A sweet midrange — the vintage Marshall sound.

Alnico, explained

A magnet material for speakers. Alnico speakers tend towards a soft, sweet sound.

DI, explained

A direct box. Gear for sending an instrument straight to a mixer or a recorder.

Hz, explained

Hertz, the unit of pitch (frequency). The smaller the number, the lower the sound.

dB, explained

Decibel, the unit for differences in level. Plus is louder, minus is quieter.

Updated

The product and brand names shown are trademarks of their respective owners.

Unofficial reference · Not affiliated with Line 6 or BOSS